Aspects Evaluated When Installing In High Intensity Tower Lighting

By Sandra Brooks


Tall structures need to be marked at night for the safety of aircraft. Therefore, adhering to the federal rules and regulations on the illumination and correct corresponding paints is crucial. Finding a contractor that will install high intensity tower lighting enables one to ascertain this requirement. Safety of the structure is enhanced as well following the enhanced visibility. The effectiveness of the installation process is dependent on the factors below.

Measurements of buildings have great influence on the lighting set up. The width of structures as well as their length influence number of lights to be installed along a given level. There is a maximum distance that should not be exceeded when installing lights. Buildings with long measurements need more investment than their narrow counterparts. This consideration will cater for aviation compliance and saving on bills accordingly.

The general definition of a building or a group of structures is defined accordingly. Positioning your radiators effectively to indicate the shape of structures is crucial. Pilots can effectively evade them, unlike poorly defined building which may seem like several separate structures. Make it clear through installing adequate bulbs on each level indicating the shape. Additionally, ensure that there is no structure shielding yours since the installed lights will be rendered useless.

The height of towers is another imperative consideration. Levels of lighting will increase with the height significantly. Therefore, medium towers have reduced levels as compared to taller ones. This way, the former will take more resources and power supply to maintain the set standards accordingly. One can easily tell a tall structure from hanging ones hence making it easier for navigation. Bridges and antennas are identified this way whereby one has horizontal while the other has vertical illumination.

Visibility must be ascertained from every angle. The experts should install lights in a way that allows pilots to identify structures from any direction. Aircraft such as helicopters can approach from any angle thus requiring one to observe this precaution. Each side must have at least a source of brightness on different levels. This will caution a pilot to deviate from the way and fly on safe airspace.

Source of power to lighting components is established. High intensity power source will serve you greatly. Therefore, connecting the building or any given tower to the national grid will assure you of continuous power generation. Nonetheless, there are occasions that grid source is affected by blackouts. Back up sources will compensate the same appropriately. There are numerous approaches to the backup sources depending on their suitability. It is worth noting that using batteries to power the radiators keeps them running continuously.

The purpose of lights is essential as well. Those meant to notify one on obstruction are different from those indicating an airport. Towers at the airport are marked effectively by such lights hence directing pilots effectively. The colors used must correspond to the federal aviation administration guidelines. Meeting international standards will be crucial especially for the new pilots in the area.

Components used in the installation must come from reliable manufacturers. Your contractor can offer insights on best producers. Going for the products that have passed the taste of time will give you peace of mind. Efficiency and ease of maintenance are required when procuring these components. Seek reputable brands to ensure durability and energy efficiency as well.




About the Author: